Package Contents
Physical Description
Warning Before Installation
Do not keep the Camera exposed
to direct sunlight.
2
1
Antenna Connector
Audio Out
Power Connector
Network Connector
Quick Installation Guide
General I/O Terminal Block
Audio In
12V DC
reset
Audio in
Audio out
Ethernet
I/O
Camera
Mounting Bracket
Power Adapter
Do not place the Camera in high
humidity environments such as
in a kitchen.
Wireless Pan/Tilt Surveillance Camera
Reset Button
Quick Installation Guide
Wireless Pan/Tilt Surveillance Camera
Built-in Microphone
MODEL NO. TL-SC4171G
Power LED
Ethernet LED
Do not place the Camera where
there are high temperatures
such as near an oven.
Ethernet Cable
Resource CD
QIG
(*The pictures are for reference only.)
Item
Description
System Requirement
The following operating systems are supported:
•
•
Solid: The electrical power is on.
Off: There is no electrical power.
Power LED
Windows 2000
Windows Vista
Windows 2003
Windows 7
Windows XP
Mac
• Solid: The Ethernet port is linked, but there is no activity.
Do not place the Camera near
devices that emit radio waves,
such as mobile phones.
• Blinking: There is traꢁc between the Ethernet port and
the network.
Ethernet LED
Reset Button
The following browsers are supported:
Internet Explorer 6 or higher
•
Off: There is no network connection.
• Step 1: Re-power on the camera and wait for at least 45s
until it restarts up normally.
• Step 2: Press the button for more than 10s, then it will be
Safari
Firefox
Chrome
MODEL NO. TL-SC4171G
(*Windows and Internet Explore Browser are recommended.)
restored to factory defaults after automatic rebooting.
Hardware Connection
Camera Mounting
4
3
Connect the Camera to the LAN network (Router or Switch)
via Ethernet cable.
Hollow anchors
Type A screws
Type B screws
NOTE: In the bracket, there are several mounting holes arranged in a circle. The direction of the camera’s
Connect the power adapter cord to the DC In jack.
Plug the power adapter into the power outlet.
installation can be anywhere within a 360 degree scope, adjusted as required.
It is strongly recommended that you connect the Ethernet cable and power adapter cord to the camera ꢀrst
before mounting.
Bracket
*For wireless connection, please refer to User Guide on the Resource CD.
Ceiling Mount
Wall Mount
Fix the bracket to the wall
using two type B screws and
two hollow wall anchors.
Before proceeding, conꢀrm that your PC is connected
to your router and can access the Internet.
Fix the camera to the bracket
with two type A screws .
1
1
Make sure that your router’s DHCP feature is enabled.
If not, please refer to your router’s instruction to
enable it.
Audio in
Audio out
12V DC
reset
Ethernet
I/O
Internet
Fix the camera to the bracket
with two type A screws .
Fix the bracket and camera
to the ceiling using two
type B screws and two
hollow ceiling anchors.
2
2
Power Cable
1
2
3
WAN
LAN
Router
Ethernet Cable
7106503435
|